en

OHS Action Plan or Prevention Program: What Is the Difference in Quebec?

Since Quebec’s new occupational health and safety (OHS) requirements came into effect on October 1, 2025, many employers have been asking the same question: do they need an OHS action plan or a prevention program? The answer depends primarily on the number of workers at the establishment, although some exceptions may apply. An action plan […]

Since Quebec’s new occupational health and safety (OHS) requirements came into effect on October 1, 2025, many employers have been asking the same question: do they need an OHS action plan or a prevention program?

The answer depends primarily on the number of workers at the establishment, although some exceptions may apply.

An action plan is sometimes described as a simplified version of a prevention program. But when you look more closely at what they must contain, the two documents have much more in common than you might think.

In both cases, employers must identify workplace hazards, determine the measures needed to eliminate or control the associated risks, and make sure those measures remain effective.

So what are the actual differences? And, more importantly, what do they mean for your business?

 

Action Plan or Prevention Program: Which One Applies to Your Workplace?

Since October 1, 2025, establishments in Quebec have been required to implement the prevention and worker participation mechanisms established under the permanent regime.

As a general rule:

19 workers or fewer: the establishment must develop and implement an OHS action plan.

20 workers or more: the establishment must develop and implement a prevention program.

Some exceptions apply, particularly to businesses that belong to a prevention mutual group or establishments covered by a multi-establishment arrangement.

Employers must also follow the rules for counting workers, which do not always correspond simply to the number of permanent employees on payroll.

Regardless of which document is required, employers still have significant prevention responsibilities. A small business can face risks just as serious as those found in an organization with hundreds of workers.

 

Two Documents With a Great Deal in Common

An action plan and a prevention program have essentially the same purpose: to organize the prevention of workplace accidents and occupational illnesses.

Their content shares several key elements.

 

Identifying Workplace Hazards and Risks

This is the starting point for any prevention initiative.

Employers must identify the risks to which workers may be exposed. These may relate to equipment, work methods, substances used, or how work is organized.

Examples include falls, machinery-related accidents, musculoskeletal disorders, and exposure to noise.

Psychosocial risks, such as excessive workloads, violence, or harassment, must also be considered.

Both mechanisms require a sound understanding of the risks present in the workplace. The legal wording explicitly refers to risk identification and analysis for a prevention program, while referring to identification for an action plan.

In practice, that difference in wording does not relieve employers of the need to assess hazardous situations. Whether preparing an action plan or a prevention program, they must understand the risks well enough to select appropriate measures and set priorities.

 

Determining Prevention Measures and Priorities

Once risks have been identified, the next step is to decide how to eliminate or control them.

Both documents must specify the measures to be implemented, priorities for action, and timelines.

The chosen measures must follow the hierarchy of controls. Employers should first seek to eliminate hazards at the source and, when that is not possible, favour methods that effectively reduce the risk.

Consider a machine with exposed moving parts that present a hazard.

Installing a fixed guard or safety device may be necessary. Simply reminding employees to be careful is not enough when the hazard can be eliminated or controlled through other measures.

This approach applies to both action plans and prevention programs.

 

Planning Monitoring and Follow-Up Measures

Putting a corrective measure in place is one thing. Making sure it continues to work is another.

Both mechanisms must include ways to maintain control over workplace risks.

These may include inspections, equipment checks, supervisory activities, or follow-up on corrective actions.

Both documents call for control measures and regular verification of their effectiveness. The legal text specifically lists monitoring, assessment, maintenance, and follow-up for the prevention program, and monitoring and maintenance for the action plan. In practice, follow-up remains essential in both cases.

In either case, the measures selected must help the workplace maintain safe working conditions.

 

Providing Personal Protective Equipment

When a risk requires personal protective equipment (PPE), the employer must provide suitable equipment.

Examples include safety glasses, gloves, hearing protection, and other equipment suited to the hazards present.

This requirement applies to both documents.

However, PPE is not a substitute for measures that eliminate or reduce risks at the source.

 

Training and Informing Workers

Employees must understand the risks associated with their work and know how to perform their tasks safely.

An action plan provides for the necessary OHS training and information measures, whereas a prevention program calls for training and information programs.

The regulatory wording differs, but the principle is the same: workers must receive the information and training they need to work safely.

 

Preventing Psychological Harassment

A policy on preventing and addressing psychological harassment must be incorporated into both mechanisms.

Employers must also take into account the psychosocial risks present in their workplaces.

Prevention is therefore not limited to physical accidents. Work organization, workplace relationships, and psychosocial working conditions are also part of the prevention process.

 

So What Are the Real Differences?

Comparing the two documents shows that their requirements are largely similar.

However, a prevention program includes certain elements that must be expressly documented. Other distinctions are mainly differences in legislative wording and do not change the need to manage and control risks in either case.

Here is an overview of the main distinctions.

This table distinguishes elements expressly required in each document without suggesting that workplaces subject to an action plan can overlook risks or other regulatory obligations.

Element

OHS Action Plan

Prevention Program

Risk identification, including psychosocial risks

Yes

Yes

Risk identification and assessment

Yes: necessary to determine appropriate measures

Yes: identification and analysis explicitly required

Prevention measures and priorities

Yes

Yes

Risk monitoring, control, and follow-up

Yes: control, monitoring, and maintenance measures

Yes: monitoring, assessment, maintenance, and follow-up explicitly required

Personal protective equipment

Yes

Yes

OHS training and information

Yes

Yes, through formal programs

Psychological harassment prevention policy

Yes

Yes

Health examinations

Occupational health obligations apply as circumstances require

Examinations required by regulation must be included in the program

List of hazardous materials and contaminants

No separate mandatory section

Yes

First aid arrangements

Obligations apply independently of the action plan

Expressly required

 

First Aid Is Mandatory Even With an Action Plan

A prevention program must provide for the maintenance of adequate first aid services.

This element is not presented in the same way among the action plan requirements.

That does not mean a workplace with fewer than 20 workers can operate without trained first aiders.

In Quebec, first aid obligations apply regardless of which OHS document an establishment must prepare.

Employers must, in particular, ensure that they have the required number of trained workplace first aiders, post their names, and make the necessary first aid supplies accessible, in accordance with applicable regulations.

A business with 12 employees that must develop an action plan therefore also has first aid obligations to meet.

The main difference is that first aid arrangements must be expressly included in the prevention program.

 

Hazardous Materials: Risks Matter Regardless of Business Size

A prevention program must include a list of the hazardous materials used at the establishment and the contaminants that may be released there.

A separate list is not expressly required as an element of the action plan.

However, any business using hazardous materials must still identify the related risks and implement appropriate preventive measures.

Consider a small manufacturing workshop with 14 employees.

If workers regularly use solvents or other hazardous chemicals, the business must address risks associated with their handling, storage, and exposure.

Even if the business is subject to an action plan, it cannot simply ignore those risks.

Other regulatory requirements, including those under WHMIS, may also apply.

In practice, the measures needed depend mainly on the nature of the work and the products being used.

 

Health Examinations: A Requirement That Does Not Apply to Every Business

A prevention program must include any health examinations required by regulation.

This does not mean every business with a prevention program must routinely arrange medical examinations for all employees.

Such examinations are required in specific circumstances, depending on workplace risks and applicable regulatory requirements.

For example, certain occupational exposures may require specific monitoring of workers’ health.

Conversely, many establishments subject to a prevention program will have no regulatory health examinations to schedule.

A workplace using an action plan may also be subject to occupational health requirements. The type of document does not replace the need to verify obligations related to its activities and workers’ exposures.

The main difference is the explicit inclusion of these examinations in the prevention program. Whether an examination must actually be performed depends on the requirements that apply to the establishment.

 

Worker Participation Mechanisms: Another Important Distinction

Beyond the documents themselves, there are differences in how workers participate in prevention.

As a general rule, establishments with 19 workers or fewer must designate a health and safety liaison officer.

For establishments with 20 workers or more, the mechanisms generally include a health and safety committee and a health and safety representative.

Exceptions may apply depending on the establishment’s circumstances.

These mechanisms allow workers to help identify risks, share observations, and contribute to improving prevention practices.

They play an important role because employees who carry out tasks every day are often best positioned to flag hazards or suggest improvements.

 

Can a Business With Fewer Than 20 Workers Be Required to Have a Prevention Program?

Yes, in some circumstances.

The 20-worker threshold is the general rule, but exceptions exist.

A business belonging to a prevention mutual group may, for example, be required to implement a prevention program under its commitments.

Special rules may also apply to multi-establishment arrangements.

The competent authority may also require a prevention program in certain circumstances provided for by law.

Before assuming an action plan is sufficient, employers should check the requirements specific to their establishment.

 

How Do You Count the Number of Workers?

The number of workers is not necessarily the same as the number of permanent employees on payroll.

Depending on the applicable rules, certain part-time or occasional workers, as well as workers hired through staffing agencies, may need to be counted.

This is particularly important for businesses whose staffing levels fluctuate during the year.

For example, a business that usually has 17 employees but regularly hires extra staff during peak periods should verify whether it still falls below the regulatory threshold.

It is better to confirm the count before deciding which mechanism to implement.

 

What Happens When a Business Reaches 20 Workers?

A growing business may need to adjust its prevention and worker participation mechanisms.

If its workforce grows from 18 to 25 workers, it may need to replace its action plan with a prevention program and establish the corresponding participation mechanisms.

However, the change does not necessarily take effect as soon as the twentieth worker arrives.

The rules for counting workers, reference periods, and regulatory deadlines must be followed.

Likewise, a business whose workforce falls below 20 cannot necessarily discontinue its prevention program immediately.

When staffing levels are close to this threshold, it is best to confirm the applicable requirements before changing established practices.

 

Do You Need to Start All Your OHS Documentation From Scratch?

Not necessarily.

Many businesses already have work procedures, training records, inspection reports, and prevention measures in place.

These can serve as the foundation for an action plan or prevention program.

The important thing is to verify that risks have been properly identified, the necessary measures have been established, and follow-up has been planned.

For example, a business may have conducted several inspections during the year without setting clear priorities for correcting the issues found.

In that case, there is no need to redo every inspection. Instead, the business can organize the information it already has and fill in the gaps.

A business moving from an action plan to a prevention program can also build on work already completed.

It should focus on verifying the elements that must expressly appear in the prevention program and the requirements applicable to its activities.

 

How Often Should an Action Plan or Prevention Program Be Updated?

Both mechanisms must be updated at least once a year.

However, prevention should not be limited to an annual review.

When new equipment is installed, a process changes, or an accident reveals a hazard, the business must reassess the situation and take the necessary action.

The document should reflect the risks actually present at the establishment.

A good practice is to schedule a complete annual review while incorporating relevant changes as they occur.

The goal is not just to keep a document current, but to ensure that prevention measures continue to meet the business’s needs.

 

What Matters Most Is How Risks Are Managed

An OHS action plan and a prevention program have more similarities than differences.

Although some requirements are specific to prevention programs, many obligations apply to businesses of all sizes.

A small organization may need to manage complex risks, just as a large business may have relatively straightforward prevention needs at some of its establishments.

What matters is understanding the risks present in the workplace and implementing measures that fit those risks.

A well-designed action plan that is actually put into practice will always be more useful than a detailed prevention program that sits untouched in a binder.

Prevention should be part of day-to-day operations, with clear responsibilities, concrete actions, and regular follow-up.

 

Need Help Structuring Your Prevention Approach?

It is not always easy to determine which requirements apply to an establishment, especially when staffing levels fluctuate or work activities involve several types of risks.

At Santinel, our occupational health and safety specialists help businesses identify risks, develop prevention mechanisms, and implement the measures they need.

Whether you need to create an action plan, update a prevention program, or review your current OHS practices, our team can help you determine the next steps.

You can also start with our free OHS self-assessment questionnaire for an initial overview of your situation.

 

Want to verify your obligations or improve your prevention approach? Explore Santinel’s OHS consulting services and contact our team to discuss your needs.

You may also like

Machine Safety in Quebec: Where Should You Start to Prevent Accidents?

A part gets jammed in a conveyor. An operator stops the machine and prepares to remove the obstruction so production can resume as quickly as possible. It seems like a simple task. After all, the machine is stopped. But is it actually safe? Could some components still move? Is an unexpected restart possible? Situations like […]

How to Make Your Health and Safety Committee More Effective: 10 Practical Tips

The health and safety committee meeting starts at 9 a.m. Members review the latest inspection report, discuss a hazardous situation reported by an employee, and address several concerns raised by different departments. Everyone participates. The discussion is productive. After an hour, the meeting comes to an end. But three weeks later, the issue identified during […]

Work Overload: How to Identify and Prevent This Psychosocial Risk

An employee regularly finishes her workday an hour later than scheduled. A manager postpones vacation because the team is short-staffed. In another department, urgent requests keep piling up, and employees can no longer complete their tasks without constant interruptions. At first, these situations may seem normal. Every business goes through busy periods. But when pressure […]

    mail